Description
Edgechem Sanding Sealer is a nitrocellulose-based wood sealer designed to enhance the adhesion of top coats with the substrate, resist moisture by sealing the wood, and eliminate seepage of finishes into the substrate. It provides a smooth surface for applying lacquer or varnish, ensuring a professional finish.
Physical Properties
- Specific Gravity: 0.91 g
- Viscosity: 200s (#4 Ford Cup at 25°C)
- Flash Point: 5°C (40°F)
- Colour: Opaque Amber
Coverage Rate
- 85-300 ft²/gallon @ 6 mils WFT, depending on surface porosity/irregularity and method of application.
Performance Features
- Fast air drying
- Easy sanding
- Enhances adhesion
- High sealing properties
- Good build
Suggested Uses
- To seal the pores of wooden surfaces, providing a sound surface for the application of lacquer or varnish.
Surface Preparation
- New Wood: Should be properly cured and finely sanded with 400-600 grit sandpaper. Remove sanding debris from the surface.
- Refinishing: If the surface is in good condition, remove all polish or wax. Sand to a matte finish and remove all sanding debris before application.
Application
- Edgechem Sanding Sealer should be reduced with Edgechem Lacquer Thinner in a ratio of 2:1 and sprayed at about 50 psi on prepared wood.
- Apply 2-3 coats at 10-minute intervals.
- To prevent blushing due to high humidity, use Edgechem Retarder as directed.
- Allow at least 30 minutes before sanding with very fine sandpaper.
- Remove all dust with a blow gun before top-coating with Edgechem High Gloss Lacquer or High Build Lacquer.
Shelf Life
- 1 Year
Clean Up
- Clean up with Edgechem Lacquer Thinner immediately after use.
Reviews
There are no reviews yet.