Description
EdgeChem Quick Dri Enamel is a tough, non-toxic, fast-drying enamel formulated for wood, masonry, and metal surfaces. It provides a high gloss, durable finish that offers excellent protection and long-lasting performance even in outdoor conditions. The enamel dries quickly, making it ideal for projects where time is a factor, and provides a smooth, hard finish with good storage stability, ensuring the product’s longevity.
Physical Properties:
- Gloss: >85% at 60° angle
- Viscosity: 90-100s
- Specific Gravity: 0.96-1.11
- Flash Point: 25-28°C (based on major solvent component)
- Color: White, Black, Silver, Gold, Customer Specified
Coverage Rate:
Approximately 380 to 400 square feet per gallon at 1 mil dry film thickness (dependent on porosity of surface).
Drying Time:
- @ 31°C / 70%RH
- Dust Free: 10-15 minutes
- Recoat time: 10-15 minutes
Surface Preparation:
Clean the surface free of dirt, oil, flakes, or loose paint. Sand metal surfaces with 180-240 grit sandpaper. Galvanized steel and aluminum must be primed with etching or epoxy primer. For wood and masonry, sand using 180 grit sandpaper, remove dust and flake. Reduce 25-33% with Edgechem Industrial Thinner.
Application:
Spray or brush 2 coats allowing at least 5 minutes for flash off between coats. Spraying Pressure should be 35-40 psi. For extra hardness, Edgechem Quick Dri Enamel may be cured with Edgechem’s Industrial Catalyst (250ml catalyst to 3.75 liters of enamel).
Shelf Life:
2 Years
Clean-Up:
Clean up with Edgechem Industrial Reducer.
Reviews
There are no reviews yet.